Printer Friendly Page

header.jpg (11121 bytes)

HOW TO ORDER SUPERIOR GRADE 6" VALVE BOXES WITH A 12" BELL

Choose from the following categories to build the valve box best suited to your personal needs. Many options are available so please look this over closely, we don't want you to miss a thing!

ONE = LID LETTERING
G = Gas
S = Sewer
W = Water		 TWO = BOX SIZE
6 = 6"		 THREE = BOX TYPE
V = Valve Box
H = Heavy Duty Box		 FOUR = ARCH
A = Yes
N = No
FIVE = LOWER TUBE DESIGN
X = 12" Bell
SIX = ADJUSTABLE RANGE
(Measured from top of the box to the bottom of the box.  Make your selection from the group that matches your Box Type for Category Three.)

VALVE BOXES                                                                            HEAVY DUTY BOXES
2 = 26" - 31"                                                                                      2 = 28" - 33"
3 = 32" - 44-1/2"                                                                               3 = 34" - 46-1/2"
4 = 41" - 57-1/2"                                                                               4 = 43" - 59-1/2"
5 = 54" - 78-5/8"                                                                               5 = 56" - 80-5/8"
SEVEN = LID TYPE
(Locking Lid is Standard)
N = Non-Locking
EIGHT = SUPPORT SYSTEM MODIFICATION

If you are using a support with your Valve Box, one of the codes below is required:
CLICK HERE If you require a BELL PLATE VALVE BOX.

CODE                   VALVE APPLICATION

17  =  4" Full-Port Nordstrom Poly Ball Valve
          4" Full-Port Kerotest Poly-Tec Ball Valve
          6" Reduced-Port Nordstrom Poly Ball Valve 
27  =  4X4" Full-Port Perfection Ball Valve 
          4X6" Reduced-Port Perfection Ball Valve 
31  =  6", 8" Frialen-Friatec Poly Ball Valve 
40  =  6" Full-Port Nordstrom Poly Ball Valve 
          6" Full-Port Kerotest Poly-Tec Ball Valve
          8" Reduced-Port Nordstrom Poly Ball Valve
NINE = LID COLOR
(Silver is Standard)
A = Yellow
B = Blue
J = Black 		TEN = VENT HOLE
C = One 3/8" Vent Hole		 ELEVEN = MAGNET
(One Magnet Located in the Flange is Standard)
D = No Magnet   (Heavy Duty Boxes are not supplied with a magnet.)

FOR OTHER OPTIONS OR VARIATIONS, PLEASE CONSULT THE FACTORY.

Click here to contact Handley Industries for Information or Ordering....

Handley Industries, Inc.