Choose from the following categories to build the test station best suited to your personal needs. Many options are available so please look this over closely, we don't want you to miss a thing.
ALL test station model numbers begin with T2.... continue to build your model number from the following categories:
T2
| ONE = LID MATERIAL I = Iron P = Plastic |
TWO = UPPER TUBE STYLE C = Plastic Flange Top with Iron Collar F = Plastic Flange Top H = Iron Heavy Duty Flange Top S = Straight Top Flange |
THREE = NUMBER OF TERMINALS 0 = 0 Terminals on a 2-Hole Board 1 = 1 Screw-(Terminal)-Type Terminal on a Board 2 = 2 Screw-(Terminal)-Type Terminals on a Board 3 = 1 Screw-(Terminal)-Type Terminal in the Wedge Nut 4 = 0 Terminals on a 5-Hole Board 5 = 5 Screw-Type Terminals on a Board 6 = 0 Terminals and No Terminal Board 7 = 1 Terminal in the Lid 8 = 2 Terminals in the Lid 9 = 5 Screw-Type Terminals on a Round Board |
| FOUR = LID COLOR (Black is Standard) A = Yellow D = Red B = Blue E = White C = Green F = Orange |
FIVE = JUMPER 1 = One Jumper 2 = Two Jumpers |
SIX = VENT HOLE L = One 3/8" Vent Hole (Mandatory for Group Two Code C, F and H) |
| SEVEN = MAGNET (One Magnet Located in the Tube is Standard) M = No Magnet at All N = One Magnet in the Wedge Nut (None on the Tube) P = Two Magnets in the Wedge Nut (None on the Tube) |
EIGHT = TUBE DESIGN (15" Straight Tube, Flared at the Bottom is Standard) Q = Telescoping, 18⅝" - 24", Flared R = Telescoping, 18 ⅝" - 24", Arched
|
FOR OTHER OPTIONS OR VARIATIONS, PLEASE CONSULT THE FACTORY.
Click here to contact Handley Industries for Information or Ordering....